尊龙凯时人生就是赢

With the development trend of the insulating rubber pad, the common problems about the insulating rubber pad are more and more common. I don't know that many beginners will encounter some problems in the application. Let's explain the difficult problems of some beginners.
1、 Problems in laying insulating rubber mat
1. When the insulating rubber board arrives at the construction site, open the insulating rubber board and scrape it flat.
2. Lift one side of the insulating rubber plate and put it on the other side. Glue with a stick in the raised area. When the glue is properly adhered, put back the raised insulating rubber plate and tamp it with the adhesive. Repeat on the side without adhesive. The extruded adhesive should be cleaned immediately.
3. When laying, grasp the laying speed, and take good care of the front, back, left and right contact.
4. When the insulation rubber board meets the irregular appearance design of the engineering building (or fixed object) during laying, it can be cut by laser indentation machine, but pay attention to the embedded limit and the vertical wound.
5. Clean the surface layer of insulating rubber sheet after laying.
2、 Price problem of insulating rubber pad
The prices of insulating rubber mats are not the same. The key differences lie in color, material quality, type of function, actual effect of insulating layer, famous brand of manufacturer, after-sales maintenance service and so on. The key factor is material quality. Generally, the price of green and red is higher than that of gray and black, and the price of anti-skid floor is higher than that of floor plan. The higher the composition of original ecological vulcanized rubber, the higher the price, the better the quality, and the better the actual effect of insulation layer.
3、 The difficult problem of distinguishing the advantages and disadvantages of insulating rubber pad
The second is the odor, the second is the elongation and ductility, and the third is whether the appearance is malleable and glossy. There are no more than five bubbles per square centimeter, and there is no crack damage when folded. The compression test is carried out and the compression test is qualified.