尊龙凯时人生就是赢

With the development trend of power technology, the application of insulating rubber pad is becoming more and more common. Because the insulation rubber pad can ensure the safety of power engineering equipment manufacturers. But many people still don't know how to buy the insulation mat that meets the test standard. Let's talk about it carefully.
The mark of qualified insulation rubber pad is that it has passed the inspection by the third party organization and released the inspection report. The inspection report of all products implemented by the "power industry power engineering safety tools and instruments quality supervision and testing center" is safe. The performance of insulating rubber pad electrical products is immediately related to the performance of insulating materials. Therefore, the insulation materials should meet the requirements of electrical products for various performances, and they should achieve the following points: 1. The insulation coating shall meet the requirements of electrical equipment performance: all machine and equipment will be allowed to penetrate the insulating materials in the electrical products, Equipment or part of the damage.
The normal insulation rubber pad is 1 meter wide, which is divided into 10 meters / roll and 5m/ roll. The total width of 0.5m-1m can be customized, the ratio of insulation rubber pad is 1.6 (the lower the proportion of insulating rubber pad is, the better the quality is), the higher the demand can be customized according to the regulations, and the higher can ensure that the lower of 20 mm can guarantee 2mm.
The insulation rubber pad is not suitable for sealing the site. During the whole process, it is necessary to prevent the excess exposure to the high temperature in the sun, prevent the oil insulation oil and the objects of ethanol and acid and alkali in the vegetable oil industry from touching, and sharp objects shall be prevented.
The insulating rubber mat is not suitable for outdoor application, and it is very easy to embrittlement in the natural environment under air condition. Therefore, it is generally used in indoor air such as high and low voltage distribution room and distribution station.
The insulation pad should be kept dry and impetuous, and put it in the area with wet and cold or high environmental humidity. The insulation layer performance of the insulating rubber pad will be decreased and may cause adverse effects.